ホーム > ブログ> Decrypt the SFF miniaturized fiber optic connector you don't know

Decrypt the SFF miniaturized fiber optic connector you don't know

August 08, 2023

In the past three decades, many optical connectors have blossomed, just like a flash in the pan. Miniaturized fiber optic connectors make today's selection process simple. Several options for selecting a small-sized fiber optic connector (SFF, SMALL FORM FACTOR OPTICAL CONNECTORS) are provided here.

Decrypt the SFF miniaturized fiber optic connector you don't know

Molex's MTP to LC 8 fiber multimode multi-core flexible cable exhibits differences in density through two leading optical connector interfaces

In the maturing market, the winner of the victory has excellent technology and is also driving the continuous development of competitive technology. In the fiber optic interconnect market, this situation has emerged in the field of small form factor optical connectors. Over the past three decades, many optical connectors have blossomed like a flash in the pan, and the LC and MTP*/MPO interconnect systems have stood out as the clear leader, enabling users and system designers worldwide. Optical components and transceiver designers are the beneficiaries.

The LC connector provides optimum performance and ease of use based on ceramic sleeve connectors. The MTP/MPO interconnect interface provides a balance between optical performance and fiber port concentration for optimum density. Although the original SC connectors are suitable for lower density patch panels and optical modules, the FC connectors are designed for a more robust test equipment environment. In most applications, the use of ST, SC, and FC connectors is declining due to the obvious advantages of LC and MTP/MPO connectors.

The LC interconnect system can support a variety of cable diameters, strain relief boots or benders. The pull tabs help the LC achieve maximum plug panel density while maintaining ease of use. For single-mode applications, the APC (Acorn Polished) version helps achieve excellent retroreflective performance. The LC connector is optionally equipped with a six-position swivel sleeve tuning feature that provides the lowest insertion loss performance when needed.

Despite the need for ever higher fiber densities, solutions typically require a direct transition from ceramic sleeve-based connectors to precision molded, MT-based multi-fiber sleeve-based connectors. This makes the situation more complicated. Now let's take a step back and explain the terminology:

● MT Sleeve – Precision Molded Sleeve Supports 2 to 72 Fibers for Fiber Centering Components for MTP/MPO Connectors

● Guide pin – A component of the pinhole centering mechanism utilized by the MT bushing to provide precise centering for multiple fibers between two mated MT bushings

● MPO connector – industry standard multi-fiber rectangular push-pull connector interface for MT casing in male (side guide) / female (no guide) configuration

● MTP connector – vendor-specific and trademarked version of the MPO connector interface, especially when paired with an optical module, improves optical and mechanical performance of the optical interface

Depending on the number of rays and the specific application, the MTP/MPO interface can support multimode and singlemode fibers with different fiber counts, cable construction, and cable outer diameter. The optical performance of the interface comes from the precision molding process of the MT sleeve and the polishing process of the glass fiber, both of which have been greatly improved over the past few years. The single-mode MT bushing is angularly polished to improve return loss performance, while the multimode bushing is PC (planar) polished. For MTP/MPOs using specific optical modules, such as QSFP (eight functional fibers, four center fibers not used) or CXP (24 fibers), there are a number of standards that drive the growth of fiber count. The new standard will define versions of 16 and 32 fibers.

Compared to LC ceramic sleeve-based connectors, MTP/MPO technology significantly improves density at the per-fiber port count. However, this requires designers, installers, and end users to carefully evaluate the management of the fiber to move, add, and change during the life of the cable infrastructure.

お問い合わせ

Author:

Mr. Tom Chen

Eメール:

megan@fibercan.com.cn

Phone/WhatsApp:

+8613662258732

人気商品
業界ニュース
私たちの顧客

October 14, 2022

You may also like
Related Categories

この仕入先にメール

タイトル:
イーメール:
メッセージ:

Your message must be betwwen 20-8000 characters

お問い合わせ

Author:

Mr. Tom Chen

Eメール:

megan@fibercan.com.cn

Phone/WhatsApp:

+8613662258732

人気商品
業界ニュース
私たちの顧客

October 14, 2022

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

送信