ホーム > ブログ> What is the difference between a fiber optic quick connector pre-embedded fiber and a non-embedded (straight-through) fiber patch cord pigtail?

What is the difference between a fiber optic quick connector pre-embedded fiber and a non-embedded (straight-through) fiber patch cord pigtail?

August 01, 2022
At present, with the continuous development of the domestic communication industry, optical fiber communication has entered the practical stage, and the scope of application is becoming wider and wider. At the same time, more and higher requirements are put forward on the optical fiber connector, and its main The development direction is that the appearance is miniaturized, the cost is low, and the performance requirements are getting higher and higher. The following is a detailed explanation of the fiber optic quick connector embedded optical fiber and non-pre-embedded (straight-through), optical fiber jumper, pigtail, between the difference.
The difference between embedded fiber optic quick connector and straight-through
The fiber optic quick-connect connector uses two technologies: pre-embedded fiber and non-embedded (straight-through) fast connector fiber. The main difference is in the connection point and connection method:
(1) Connection point setting
The connection point of the embedded fiber is set inside the connector, the pre-embedded fiber has a preset matching liquid, and the non-embedded (straight-through) fiber connection point is on the surface of the connector, and the matching liquid is not preset, and is directly connected to the target fiber through the adapter.
(2) Connection method
The fiber optic quick-connect connector inserts and fixes the fiber into the pin and polishes the surface of the pin to achieve alignment in the coupling tube. The outer components of the pins are made of metal or non-metal materials. The butt end of the pin must be ground and the other end typically uses a bend limiting member to support the fiber or fiber optic cable to relieve stress. The coupling tube is generally made of two semi-synthetic, fastened cylindrical members made of ceramic, or bronze, and is equipped with a metal or plastic flange to facilitate the mounting and fixing of the connector. In order to align the fiber as precisely as possible, the processing precision of the pin and the coupling tube is very high.
There is no embedded fiber and matching paste inside the straight-through fiber quick connector device. After the fiber is clamped and clamped, the end face of the fiber can be inspected with a magnifying glass to avoid the occurrence of excessive fiber connection loss. The axial belt positioning mechanism does not advance the fiber axially during the clamping process.
The difference between fiber jumpers, pigtails, and fiber connectors
(1) The fiber jumper is used to make the jumper from the device to the fiber-optic wiring link. It has a thick protective layer and is generally used for the connection between the optical transceiver and the terminal box.
(2) The pigtail is also called the pigtail line. Only one end has a connector, and the other end is a broken end of a fiber optic cable core. It is connected to the core of other optical cables by welding, and is often found in the fiber terminal box for connecting the optical cable. With fiber optic transceivers (couplers, jumpers, etc. are also used).
A fiber optic connector is a detachable (active) connection between an optical fiber and an optical fiber. The two ends of the optical fiber are precisely butted together so that the optical energy output from the transmitting optical fiber can be coupled to the receiving optical fiber to the maximum extent. It also minimizes the impact on the system due to its involvement in the optical link, which is a basic requirement for fiber optic connectors.
To a certain extent, the fiber optic connector also affects the reliability and performance of the optical transmission system. First, the optical cable comes in from the outside, and the optical cable is fused in the optical cable box. This is the terminal box that you said. The fusion of the optical cable is the door technology. Need to strip the cable, use the pigtail and the fine fiber in the cable to weld, and then put it in the box, so that our pigtails will come out, and the head of the fiber will be connected to the ODF (a shelf, connected by a coupler) The other side of the shelf is also made of pigtails (that is, fiber jumpers can also be used, in fact, the pigtails are used for fiber jumpers), connected to the photoelectric converter, and the optical transceiver is connected to the router by the network cable---switch ---LAN---Host.
In the above steps, the fiber distribution frame can be neglected, and the pigtail is directly connected to the fiber transceiver, so that the coupler is not used. The coupler is the fiber that connects the two pigtails (the fiber jumpers are connected together). The coupler is a movable connection for two fibers or pigtails. The flanged fiber optic terminal box is the final connector of a fiber optic cable. One end is a fiber optic cable and the other end is a pigtail, which is equivalent to splitting a fiber optic cable into two. For a single optical fiber device, the optical fiber fusion splicing box is used for connecting two optical cables into one long optical cable. They are not interchangeable. The optical cable and the optical transceiver are connected through the optical fiber terminal box, that is, the optical transceiver can only be used. Insert the pigtail, can you understand this about the terminal box and the fusion box? In which the two heads of the optical fiber are fused, except that the former is the fusion of the optical cable and the pigtail, and the latter is the fusion between the optical cables. Is this basically the same for the connection box and the terminal box?
It is not the same. The connection box is fully sealed and waterproof. However, it cannot fix the pigtail. The terminal box is not waterproof. The internal structure can fix the fiber optic cable on one side, and the fixed fiber pigtail coupler can be connected to the fiber or pigtail. It is active, not welded. The coupler can only connect two pigtails and is divided into interfaces such as SC/PCFC/PC, and the cable and the pigtail are welded by the fusion machine and are dead.
What is the difference between pigtails and jumpers? Can you divide the jumper into two for the pigtail?
Only one end of the pigtail is a movable joint, and both ends of the jumper are movable joints. There are many kinds of interfaces. Different interfaces require different couplers. The jumper can be used as a pigtail. We are doing this. A head is called a fiber jumper. The middle fiber is usually three meters long. It is used to connect the coupler and fiber transceiver, optical module or directly connect two devices with optical ports. There is only one head and a small fiber behind. The pigtails are generally made of two fiber-optic jumpers with the same head. The middle is cut into two pigtails, which are mainly used to weld on the cable. After the cable is melted on the pigtail head, it can be connected to the clutch or directly connected. Optical transceivers, optical modules. The fiber optic connector should refer to the coupler (flange), which is used to connect the pigtail and the fiber jumper.
お問い合わせ

Author:

Mr. Tom Chen

Eメール:

megan@fibercan.com.cn

Phone/WhatsApp:

+8613662258732

人気商品
業界ニュース
私たちの顧客

October 14, 2022

You may also like
Related Categories

この仕入先にメール

タイトル:
イーメール:
メッセージ:

Your message must be betwwen 20-8000 characters

お問い合わせ

Author:

Mr. Tom Chen

Eメール:

megan@fibercan.com.cn

Phone/WhatsApp:

+8613662258732

人気商品
業界ニュース
私たちの顧客

October 14, 2022

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

送信